M10N GPSSE100Dual anti-interference technologyNo fear of interference from strong signals such as high-power image transmission from drones and high-voltage linesDual anti-interference technologyFilter interference : Two-stage filtering with 78db attenuation effectively filters out-of-band interference.Anti-interference: 20dBM in-band 1dBM compression point high linear LNA, even if a small amount of interference signal passes through the filter, its impact is reduced to a minimum.Effectively resist strong signal interference, such as high-power image transmission on drones, high-voltage lines, etc.Extreme performance50cm positioning accuracy, search for 20 stars in 6 seconds in open areas, strong valley bottom positioning capability.1561±1MHz, 1575±1MHz, 1602~1610MHz three frequencies.BD1, GPS/L1, Galileo/E1, GLonass/G1, four stars can work simultaneously.Satellite-based augmentation system (SBAS) L1 C/A: American WAAS, European EGNOS, Japanese MSAS.SE100 protocol: Default NMEA protocol. When connecting to the flight control, the port protocol type of the flight control will be automatically synchronized (baud rate 115200); after disconnecting from the flight control and the button battery in the GPS is exhausted (usually about 2 hours) , the GPS protocol will return to the factory default NMEA protocol.Baud rate: 38.4KPower supply: Voltage: 5±5%VDCCurrent: 50-100mAHigh-end configurationUsing Ublox M10050 module, built-in IST8310 high-precision electronic compass (I2C interface)2.5dbI high gain and high selectivity ceramic antenna.GPS dedicated high gain (20dB) MMIC chip.Two-stage Murata surface acoustic filter, front dual filter design, stronger anti-interference ability. Manual Download
