Waveshare ESP32-S3 7inch Touch LCD Development Board

Waveshare ESP32-S3 7inch Touch LCD Development BoardWaveshare ESP32-S3 7inch Touch LCD Development BoardESP32-S3 7inch Display Development Board, ESP32 With Display, 800×480, Options For Touch Function, 32-bit LX7 Dual-core Processor, Up to 240MHz Frequency, Supports WiFi & Bluetooth, With Onboard AntennaESP32-S3 7″ LCD Development BoardIntegrates RGB interface LCD and 5-point capacitive touch (optional)Version OptionsESP32-S3-LCD-7 without touch controlESP32-S3-Touch-LCD-7 with touch controlFeaturesThis product is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 7inch LCD screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applicationsEquipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequencySupports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antennaBuilt in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 16MB FlashOnboard 7inch LCD display, 800×480 resolution, 65K colorSupports 5-point capacitive touch control via I2C interface, with interrupt support (for touch version only)Onboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB portSupports flexible clock, module power supply independent setting, and other control to realize low power consumption in different scenariosApplication ScenariosIPS Display PanelExcellent display performance, 170° viewing angleSupports multiple peripheralsSupports the expansion of multiple peripherals via Sensor, CAN, RS485, and I2C interfacesApplication Examplefor reference only, please refer to the Package Content for the detailed part listWhat’s On BoardESP32-S3N16R8 The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, integrated 8MB PSRAM and 16MB Flash7inch display panel connectorTouch panel connectorTF card slotUSB Type-C portUART1 Port USB TO UART Type-C portUART2 connector UART1 and UART2 are the same UART, selected by switchSensor headerCAN headerI2C headerRS485 header3.7V single lithium battery PH2.0 headerCAN terminal resistor selectionRS485 terminal resistor selectionUART selection select UART1 or UART2BOOT button Press and hold while powering on for program burningRESET buttonI2C level selection 3.3V / 5VDONE Lithium battery charging completed indicatorCHG Lithium battery charging indicatorPWR Power supply indicatoroutline dimensionsESP32-S3-LCD-7ESP32-S3-Touch-LCD-7Development Board SizeResources & ServicesWiki: www.waveshare.com/wiki/ESP32-S3-Touch-LCD-7