DescriptionThe ESP32 C3 Super Mini is an loT mini development board based on the Espressif ESP32-C3 Wi-Fi/Bluetooth dual-mode chip. The ESP32-C3 is a 32-bit RISC-V CPU that contains the FPU (floating point unit) for32-bit single-precision operations with powerful computing power. It has excellent performance and supports IEEE 802.11b /g/n Wi-Fi and Bluetooth 5 (LE) protocols. The board comes with an external antenna to enhance signal strength for wireless applications. It also has a small and delicate form factor combined with a single-sided surface mount design. It is equipped with a wealth of interfaces, with 11 digital I/ OS that can be used as PWM pins and 4 analog I/OS that can be used as ADC pins. It supports four serial interfaces: UART, I2C and SPI. The board also has a small reset button and a boot loader mode button.Combined with the above features, the ESP32C3SuperMini is positioned as a high-performance, low power, cost-effective IoT mini development board for low-power IoT applications and wireless wearable applications.Product Parameter: 1. Powerful CPU: ESP32-C3, 32-bit RISC-V single-core processor, running up to 160 MHz 2. WiFi: 802.11b/g/n protocol, 2.4GhHz, support Station mode, SoftAP mode, SoftAP Station mode, hybrid mode 3. Bluetooth: Bluetooth 5.0 4. Ultra-low power consumption: deep sleep power consumption of about 43uA 5. Rich board resources: 400KB SRAM, 384KB ROM built-in 4Mflash. 6. Chip model: ESP32C3FN4 7. Ultra-small size: As small as the thumb (22.52x18mm) classic shape, suitable for wearables and small projects 8. Reliable security features: Encryption hardware accelerators that support AES-128/256, hashing, RSA, HMAC, digital signatures, and secure startup 9. Rich interface: 1x12C, 1xSPI, 2xUART, 11xGPIO(PWM), 4xADC 10. Single-sided components, surface mount design 11. Onboard LED blue light: GPIO8 pin12. Size : 24 × 18 × 5 millimetersExternal power supply :If external power supply is required, just connect the level of the external power supply to the position of 5V.GND connects to the negative terminal. (Support 3.3 – 6V power supply). Remember that when connecting the external power supply, you cannot access USB. USB and external power supply can only choose one.Download Arduino IDEBrowse: https://www.arduino.cc/en/Main/Software
